Check railings, fences, stairs, gates, balconies, or metal structures for rust, peeling paint, corrosion, cracks, loose parts, or surface damage.

Cover nearby surfaces, plants, floors, concrete, siding, and fixtures with drop cloths, plastic, and masking materials to prevent dust and paint overspray.

Remove dirt, grease, dust, mildew, and debris using appropriate cleaning products and pressure washing if necessary.

Scrape, sand, wire brush, or grind the surface to remove loose paint, rust, and corrosion until the metal is smooth and properly prepared.

Sand rough edges and remaining imperfections to create a clean, even surface that promotes strong paint adhesion.

Tighten loose sections and repair minor damage or weak spots where needed before painting.

Thoroughly wipe and clean the metal surface to eliminate sanding dust, rust particles, and contaminants.

Treat rust-prone areas with a rust converter or protective treatment to help prevent future corrosion.

Apply a high-quality metal primer designed for wrought iron and exterior metal surfaces to improve durability and paint adhesion.

Use brushes to paint corners, joints, decorative details, welds, and hard-to-reach sections.

Use spray equipment, brushes, or rollers to apply smooth, even coats of durable metal paint across the entire surface.

After the first coat dries completely, apply a second coat for maximum protection, color consistency, and long-lasting performance.

Inspect the surface carefully for missed spots, uneven coverage, drips, or imperfections and complete all necessary touch-ups.

Remove protective coverings, clean the work area, and perform a final walkthrough to ensure a clean, smooth, and professional finish.